English
Operation manual
21
The menu of the bench «Automatic mode» (fig. 23) contains:
Figure 23. Menu of the bench «Automatic mode»
1 -
Information field in which the results of measurements are displayed graphically. If
necessary, you can extend the selected feature fragment. This field contains two buttons:
- returns the original scale of the chart display;
- transition between charts.
2
– Automatic mode menu:
«
Settings
» - allows you to adjust the parameters and sequence of the diagnostic process;
«
Save
» - go to the menu of saving diagnostic results.
WARNING!
Running the diagnostic process removes previous results if they have not been
saved.
«
» - switch in the menu of printing the results of diagnostics.
«
Clean
» - Removes current diagnostic results.
«
Open
» - Opens stored diagnostic results.
3
- «START» button starts the process of recording the measured data, the results are displayed
on the screen in real time. Pressing again stops the process.
4
- Information field in which the numerical values of the measured parameters are displayed
in.
5
- Button to go to the main menu.
