MSG Equipment MSG MS013 COM, User Manual

10

6.1 Alternator or Voltage Regulator Testing

•  Connect an alternator or a voltage regulator to the testing equipment (test bench for diagnostics 

of alternators, voltage regulator tester).

•  Connect the adapter to 12V power supply.

•  Select the required option in the adapter menu with buttons                                      .

•  Connect the control output of a voltage regulator to GC connection port.

•  Enter the required testing mode with button                    .

 
•  Follow the display data, set voltage with 

UP

 and 

DOWN

 buttons.

•  To exit the testing mode, press button                   .
      Disconnect the wires. 

6.2 Ohmmeter Mode

•  Select the required option in the adapter menu with buttons                                      .

•  Enter the required testing mode with button                    .

•  Connect GC and ‘-’ wires of the adapter outputs to measured resistance.

 
•  To exit the testing mode, press button                    .
      Disconnect the wires.

6. STEP-BY-STEP INSTRUCTION

   Before using the adapter, make sure that the device is not damaged and has no cracks.

User Manual - Tester MSG MS013 COM