10
2
、
Use the hexagon key to tighten the set screw
②
.
3
、
Insert the plug
④
on the lamp chamber into the
socket of microscope
⑤
.
3-2Install the objective nosepiece
1
、
Turn the coarse focusing knob to lower the
stage.
2
、
Slightly loosen the fixing screw
①
of the
objective turntable.
3
、
Do not screw the fixing screw
①
too loose,
otherwise it is difficult to replace the objective nosepiece.
3
、
Hold the objective lens nosepiece, keep the dovetail mounting port
②
horizontal,
insert it into the dovetail
③
on the microscope arm, and gently push it into the end.
4
、
Tighten the fixing screw of objective lens turntable
①
.
When installing or removing the objective nosepiece with cable, the cable
must be removed in advance.
3-3 Installing cables
Pass the cable
④
under the microscope body
arm to the rear panel, let the cable pass through
the cable rack, and then plug the cable into the
socket on the rear panel.
Summary of Contents for MF43-N
Page 2: ...Research grade fluorescence microscope MF43 N ...
Page 6: ......
