Chapter 3
3-14
device to enhance Max Saving mode and stop CPU internal clock. Settings are
Disabled
and
Enabled
.
Init VGA BIOS From S3
This setting allows the system to initialize the VGA BIOS from S3 (Suspend to
RAM) sleep state. Setting options:
Enabled
and
Disabled
.
Power/Sleep LED
This item configures how the system uses power LED on the case to indicate
the sleep state. Available options are:
Single LED
The power LED blinks to indicate the sleep state without
changing its color.
Dual LED
The power LED changes its color to indicate the sleep
state.
Suspend Time Out
After the selected period of system inactivity, all devices except the CPU shut
off. Settings are
Disabled, 1 min, 2 min, 3 min, 4 min, 5 min, 10 min, 15 min, 20
min, 30 min.
Pentium 4 Thermal Monitor
This setting enables/disables the monitoring of the Pentium 4 processor tem-
perature to prevent the CPU from overheating.
Power Button Function
This feature sets the function of the power button. Settings are:
Power Off
The power button functions as normal power off button.
Suspend
When you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.
After AC Power Lost
This setting specifies whether your system will reboot after a power failure or
interrupts occurs. Available settings are:
Power Off
Leaves the computer in the power off state.
Power On
Reboots the computer.
Last State
Restores the system to the status before power failure or
interrupt occurs.
