45
BIOS Setup
f
Memory Try It ! [Disabled]
It improve memory compatibility or performance by choosing optimized memory
preset.
f
DRAM Timing Mode [Link]
Selects the memory timing mode.
[Link]
Allows user to configure the DRAM timing for all memory channel.
[UnLink]
Allows user to configure the DRAM timing for respective memory
channel.
f
Advanced DRAM Configuration
Press
Enter
to enter the sub-menu. User can set the memory timing for each/ all
memory channel. The system may become un-stable or un-bootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and
enter the BIOS to load the default settings.)
f
Memory Fast Boot [Auto]*
Enables or disables the initiation and training for memory every booting.
[Auto]
The setting will be configured automatically by BIOS.
[Enabled]
System will completely keep the archives of first intiation and training
for memory. So the memory will not be initialed and trained when
booting to accelerate the system booting time.
[Disabled]
The memory will be initialed and trained every booting.
f
CPU Voltages control [Auto]
These options allows you to set the voltages related to CPU. If set to
Auto
, BIOS will
set these voltages automatically or you can set it manually.
f
DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to
Auto
, BIOS
will set these voltages automatically or you can set it manually.
f
CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the CPU
or memory has been replaced.
[Enabled]
The system will issue a warning message during boot and then you have
to load the default settings for new devices.
[Disabled]
Disables this function and keeps the current BIOS settings.
f
CPU Specifications
Press
Enter
to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing [F4].
Read only.
f
CPU Technology Support
Press
Enter
to enter the sub-menu. The sub-menu shows the key features of
installed CPU. Read only.
