35
BIOS Setup
Advanced
f
PCI Subsystem Settings
Sets PCI, PCI express interface protocol and latency timer. Press
Enter
to enter the
sub-menu.
f
PEG0 - Max Link Speed [Gen1]
Sets PCI Express protocol of PCIe x16 slot for matching different installed devices.
[Auto]
This item will be configured automatically by BIOS.
[Gen1]
Enables PCIe Gen1 support only.
[Gen2]
Enables PCIe Gen2 support only.
[Gen3]
Enables PCIe Gen3 support only.
f
PCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]
f
Above 4G memory/ Crypto Currency mining [Enabled]
Enables or disables 64-bit capable devices to be decoded in above 4G address
space. It is only available if the system supports 64-bit PCI decoding.
[Enabled]
Allows you to utilize more than 4x GPUs.
[Disabled]
Disables this function.
f
ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press
Enter
to enter the sub-
menu.
f
Power LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color] The power LED turns to another color to indicate the S3 state.
[Blinking]
The power LED blinks to indicate the S3 state.
f
CPU Over Temperature Alert [Auto]
Enables or disables the CPU overheating alert when CPU temperature is over 80
degrees centigrade.
f
Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
Enter
to enter the sub-menu.
f
Onboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
f
LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings. This
item will appear when
Onboard LAN Controller
is enabled.
[Enabled]
Enables the onboard LAN Boot ROM.
[Disabled]
Disables the onboard LAN Boot ROM.
