14 Manual Version: 1.0
4.
Troubleshooting
◎
My system does not start.
1. Check if the system is connected to an electrical outlet and it is turned on.
2. Check if the power cord and all cables are connected firmly.
3.
Press the “Power On” button to turn it on again.
◎
When I turn on my computer, the message “Operating System not found”
appears or Windows does not start.
1. Check if the OS has been properly installed.
2. Check Boot Device Priority settings in the BIOS Setup.
◎
The image is distorted, flashes or flickers.
1. Select the correct resolution, refresh rate and make adjustment.
◎
The image is blurred.
1. Change the resolution, refresh rate and make adjustment.
◎
The system cannot be shut down.
It is best to shut down your computer using the Shut Down icon in the operating
system. Using other methods, including those listed below, may result in data
failure. If the Shut Down procedure does not work, choose one of the following
steps:
1. Press Ctrl+Alt+Del keys, then choose Shut Down.
2. Press and hold the power button till the system is off.
3. Unplug the power cable from the system.
◎
The Internet connection has problems.
1. If you are having a problem connecting to your Internet Service Provider (ISP),
check if the ISP is experiencing technical problems.
2. Check the Network settings and connection and make sure the system is properly
configured to Internet access.
3. The wireless LAN data transfer speed is affected by distance and obstructions
between devices and access points. To maximize the data transfer speed, choose
the access point closest to your system.
Summary of Contents for HMI-C150H3CS4
