1-3
Getting Started
USB Interface
†
10 USB ports
- Controlled by nForce4-4X chipset
- 4 ports in the rear I/O, 6 ports via the external bracket
NV RAID (Software)
†
Supports up to 4 SATA and 4 ATA133 Hard drives
- RAID 0, 1, 0+1, or JBOD supported
- RAID function available for P SATA H/D drives
LAN
†
Marvell PHY 88E1111 Gigabit Ethernet chip
(Optional)
†
Realtek 8201 CL 10/100Mb/s Ethernet chip
(Optional)
Audio
†
RealTek ALC655 6-channel software audio codec
- Compliance with AC97 v2.3 spec.
- Meets PC2001 audio performance requirement
On-Board Peripherals
†
On-Board Peripherals include:
- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
- 2 serial ports
- 1 parallel port supporting SPP/EPP/ECP mode
- 10 USB2.0 ports (Rear*4 / Front*6)
- 1 Audio (Line-In/Line-Out/MIC) port
- 1 RJ-45 LAN jack
- 1 CD-In pinheader
- 2 IDE ports support 4 IDE devices
- 4 serial ATA ports
BIOS
†
The mainboard BIOS provides
“
Plug & Play
”
BIOS which detects the peripheral
devices and expansion cards of the board automatically.
†
The mainboard provides a Desktop Management Interface (DMI) function which
records your mainboard specifications.
†
Supports boot from LAN, USB Device 1.1 & 2.0, and SATA HDD.
To create the combination installation CD, please refer to the following
website:
http://www.microsoft.com/windows2000/downloads/servicepacks/
sp4/HFdeploy.htm