5-10
MS-7125 ATX Mainboard
Initializing and Using the Disk Array
The RAID array is now ready to be initialized under Windows.
1. Launch Computer Management by clicking “Start” --> “Settings” --> “Control Panel”
--> “Switch to Classic View” then open the “Administrative Tools” folder and
double click on “Computer Management”.
2. Click “Disk Management” (under the “Storage” section). The Initialize and Convert
Disk Wizards appears.
3. Click
Next
. The Select Disks to Initialize window appears. The disks listed depend
on how many arrays you have configured.
4. Click
Next
. The Select Disks to Convert window appears.
