background image

30

Overview of Components

CPU Socket

Introduction to the LGA 1151 CPU

The surface of the LGA 1151 CPU has 

two 

notches

 and a 

golden triangle

 to 

assist in correctly lining up the CPU for 

motherboard placement. The golden 

triangle is the Pin 1 indicator.

 Important

 

y

Always unplug the power cord from the power outlet before installing or removing 

the CPU.

 

y

Please retain the CPU protective cap after installing the processor. MSI will deal with 

Return Merchandise Authorization (RMA) requests if only the motherboard comes with 

the protective cap on the CPU socket.

 

y

When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink 

is necessary to prevent overheating and maintain system stability.

 

y

Confirm that the CPU heatsink has formed a tight seal with the CPU before booting 

your system.

 

y

Overheating can seriously damage the CPU and motherboard. Always make sure 

the cooling fans work properly to protect the CPU from overheating. Be sure to apply 

an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to 

enhance heat dissipation.

 

y

Whenever the CPU is not installed, always protect the CPU socket pins by covering 

the socket with the plastic cap.

 

y

If you purchased a separate CPU and heatsink/ cooler, Please refer to the 

documentation in the heatsink/ cooler package for more details about installation.

 

y

This motherboard is designed to support overclocking. Before attempting to 

overclock, please make sure that all other system components can tolerate 

overclocking. Any attempt to operate beyond product specifications is not 

recommended. MSI

®

 does not guarantee the damages or risks caused by inadequate 

operation beyond product specifications.

50.77 mm

Distance from the center of the 
CPU to the nearest DIMM slot.

Summary of Contents for MEG Z390 GODLIKE
















































































































Reviews: