41
On-The-Go Function
The USB On-The-Go function is a new technology, also called OTG.
MEGA
VIEW 588
support OTG function and can directly backup data from portable
disks and digital cameras without going through PC. To transfer files from
portable devices, find the following steps:
1.
Connect USB host cable, the short one, to
MEGA VIEW 588
USB port.
Then
MEGA VIEW 588
is ready to for USB device.
2.
Connect your USB device, such as digital camera or USB stick, to the other
end to the USB host cable as you connect it to your PC.
Note: The USB device and MEGA VIEW 588 should be turned on before
connection.
3.
You will see the figure below when connection initialed . To copy all the
files from USB device connected to
MEGA VIEW 588
, press
REC
Key as
the message mentions.
4.
Files on the USB device will be saved to a folder under
USB OTG
folder of
MEGA VIEW 588
, folder name will be
USB00001
,
USB00002
, etc.
5.
If the connected USB device doesn’t support OTG function, the following
message will show on the display .
Note: MEGA VIEW 588 supports limited USB device. For more up-to-date
compatibility list, please visit http://www.msi.com.tw
Note: We strongly recommend keeping MEGA VIEW 588 battery recharging
while USB device is connected to it.