CHAPTER 3
CHAPTER 3
CHAPTER 3
CHAPTER 3
CHAPTER 3
AWARD
AWARD
AWARD
AWARD
AWARD
®
BIOS SETUP
BIOS SETUP
BIOS SETUP
BIOS SETUP
BIOS SETUP
3-21
Onboard FDC Controller
Enabled
Onboard Serial Port 1
3F8/IRQ4
Onboard Serial Port 2
2F8/IRQ3
UART Mode Select
Normal
xUR2 Duplex Mode
Half
Onboard Parallel Port
378/IRQ7
Parallel Port Mode
SPP
xECP Mode Use DMA
3
Game Port Address
201
Midi Port Address
330
Midi Port IRQ
10
Item Help
Menu Level >
↑ ↓ → ←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
SIS 950 SuperIO Device
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the systen board and you wish to use it. If the system has no
floppy drive, select Disabled in this field.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and
second serial ports.
UART Mode Select
This item allows you to select the UART mode.
UR2 Duplex Mode
This item allows you to select the IR half/full duplex function.