CHAPTER 3
AMI
®
BIOS USERS GUIDE
3-16
LAN Resume from Soft-Off
During Disabled, the system will ignore any incoming signal from
the LAN network card. During Enabled, the system will boot up if there’s an
incoming signal from the LAN network card.
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system. Then, power off the system. This
function will work the next time you power on.
PME# Resume from Soft Off
During Disabled, the system will ignore any event on PME (Power
Management Event). During Enabled, the system wull boot up if there’s an
event on PME. The default setting is Disabled.
RTC Alarm Resume From Soft-Off
This function is for setting the Date, Hour, Minute, and Second for
your computer to boot up. During Disabled, you cannot use this function.
During Enabled, Choose the Date, Hour, Minute, and Second:
RTC Alarm Date
Choose which day the system will boot up.
RTC Alarm Hour
Choose which hour the system will boot up.
RTC Alarm Minute
Choose which minute the system will boot up.
RTC Alarm Second
Choose which second the system will boot up.
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system. Then, power off the system. This
function will work the next time you power on.
