3-21
BIOS Setup
saving modes when activity or input signal of the specified hardware
peripheral or component is detected. Settings:
Enabled
,
Disabled
.
PS2KB/PS2MS Wake Up From S3
These fields controls how the PS2 keyboard/mouse can power on the
system. Settings:
Disabled, Enabled
.
Resume By Alarm
The field is used to enable or disable the function of Resume By Alarm.
Settings:
Disabled, Enabled
.
Month Alarm
When Resume By Alarm is set to Enabled, the field specifies the month
for
Resume By Alarm
. Settings:
NA, 1-12.
Date of Month Alarm
When Resume By Alarm is set to Enabled, the field specifies the date for
Resume By Alarm
. Settings:
0~31
.
Time (hh:mm:ss) Alarm
When Resume By Alarm is set to Enabled, the field specifies the time for
Resume By Alarm
. Format is <hour><minute><second>.
** Reload Global Timer Events **
Primary/Secondary IDE, FDD/COM/LPT Ports, PCI PIRQ [A-D]#
The global timer is the hardware timer that counts down to the power saving
modes. If the monitoring of the listed hardware peripherals or components is
enabled, the activity of the specified peripherals or components will awaken
the system or reload the original count of global timer when they are accessed.