3-23
BIOS Setup
Run VGABIOS if S3 Resume
When
ACPI Suspend Mode
is set to S3 or S1&S3, users can select the options
in this field. Selecting [Yes] allows BIOS to call VGABIOS to initializet he
VGA card when system wakes up (resumes) from S3 sleep state. The system
resume time is shortened when you disable the function, but system will need
an AGP driver to initialize the VGA card. Therefore, if the AGP driver of the
card does not support the initialization feature, the display may work abnor-
mally or not function after resuming form S3. Options:
Auto, Yes, No.
Power Management
This item is used to select the degree (or type) of power saving and is related
to these modes:
Suspend Mode
and
HDD Power Down
. There are three op-
tions for power management:
Min Saving
Minimum Power Management. Suspend Mode=1 Hour
Max Saving
Maximum Power Management. Suspend Mode=1 Min
User Define
Allows end users to configure each mode separately.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
This selection will cause the system to turn off
the vertical and horizontal synchronization ports
and write blanks to the video buffer.
Blank Screen
This option only writes blaniks tot he video
buffer.
DPMS
Initial display power management signaling.
Video Off In Suspend
This option enables the monitor to be turned off during the suspend mode.
Settings:
Yes, No.
Suspend Type
This item allows you to select he suspend type for system power management.
Settings:
Stop Grant, PwrOn Suspend.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use. Activity of the se-
lected IRQ always awakens the system. Settings:
3, 4, 5, 7, 9, 10, 11, NA.
