3-16
M S-7176 ATX M ainboard
Video Off In Suspend
This option enables the monitor to be turned off during the suspend mode. Settings:
[Yes], [No].
Suspend Time Out (Minute)
If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off. Settings: [Disabled], [1min], [2min], [4min], [8min],
[12min], [20min], [30min], [40min], [1hour].
Power Button Function
This feature allows users to configure the Power Button function. Settings are:
[Power Off]
The power button functions as a normal power-on/-off button.
[Suspend]
When you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.
Wakeup Event Setup
Press <Enter> and the following sub-menu appears.
Resume by PCI Device (PME#)
When setting to [Enabled], this setting allows your system to be awakened by PCI
Device from the power saving modes through any event on PME (Power
Management Event). Setting options:
[Disabled], [Enabled].
Resume From S3 by USB
The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state. Setting options: [Disabled], [Enabled].
Resume by RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 power off state. Setting options:
[Disabled], [Enabled].
Date (of Month) Alarm
The field specifies the date for
Resume by RTC Alarm
.
Settings: [0]~[31].
Time (hh:mm:ss) Alarm
The field specifies the time for
Resume by RTC Alarm
. Format is <hour><minute>
<second>.
Summary of Contents for MS-7176
