2 - 6
MS-7222 Micro-ATX Mainboard
MSI Reminds You...
1. Check the information in
PC Health Status
in BIOS (Chapter 3) for
the CPU temperature.
2. Whenever CPU is not installed, always protect your CPU socket pin
with the plastic cap covered (shown in step 1) to avoid damaging.
3. Please note that the mating/unmating durability of the CPU is 20 cycles.
Therefore we suggest you do not plug/unplug the CPU too often.
10. Align the holes on the mainboard
with the heatsink. Push down the
c ooler unt il its f our c lips get
wedged int o t he holes of the
mainboard.
12. Turn over the mainboard to con-
firm that the clip-ends are cor-
rectly inserted.
11. Press the four hooks down to fas-
ten the cooler. Then rotate the lock-
ing switch (refer to the correct di-
rection marked on it) to lock the
hooks.
9. Press down the load lever lightly
onto the load plate, and then se-
cure the lever with the hook under
retention tab.
locking
switch
Summary of Contents for MS-7222
Page 1: ...i G52 72221X1 MS 7222 v1 X Micro ATX Mainboard PM8PM...
Page 5: ...v WEEE Statement...
Page 6: ...vi...
Page 7: ...vii...
