3-10
MS-7276 Mainboard
Important
Enabling the functionality of Hyper-Threading Technology for your computer
system requires ALL of the following platform Components:
*
CPU:
An Intel
®
Pentium
®
4 Processor with HT Technology;
*
Chipset:
An Intel
®
Chipset that supports HT Technology;
*
BIOS:
A BIOS that supports HT Technology and has it enabled;
*
OS:
An operating system that supports HT Technology.
For more information on Hyper-threading Technology, go to:
www.intel.com/info/hyperthreading
Hardware Prefetcher:
Enable this item will improve the performance of CPU. It is only available with P4 CPU
installed.
IOAPIC Function
This field is used to enable or disable the APIC (Advanced Programmable Interrupt
Controller). Due to compliance with PC2001 design guide, the system is able to run in
APIC mode. Enabling APIC mode will expand available IRQ resources for the system.
Boot Sequence
Press <Enter> to enter the sub-menu:
1st/2nd/3rd Boot Device & Boot From Other Device
The items allow you to set the sequence of boot devices where BIOS attempts
to load the disk operating system.
Intel AMT Configuration (optional, only for ICH8DO)
Press <Enter> to enter the sub-menu:
Intel AMT Support
The items allow you to enable/disable the AMT (Active Management Technology)
support.
Force IDER
IDER (IDE redirection) enables the ability to boot system from a network location.
Trusted Computing
Press <Enter> to enter the sub-menu:
TCG/TPM SUPPORT
The items allow you to enable/disable the TPM (Trusted Platform Module) (1.1/1.
2) support.
