2-10
Hardware Setup
▍
Fan Power Connector: CPUFAN1 / SYSFAN1
The fan power connectors support system cooling fan with +12V. When
connecting the wire to the connectors, always note that the red wire is the
positive and should be connected to the +12V; the black wire is Ground
and should be connected to GND. If the mainboard has a System Hard-
ware Monitor chipset on-board, you must use a specially designed fan
with speed sensor to take advantage of the CPU fan control.
1.Gro
und
2.+1
2V
3.Se
nsor
Important
Please refer to the recommended CPU fans at processor’s official
website or consult the vendors for proper CPU cooling fan.
Fan cooler set with 3- or 4-pin power connector are both available
for CPUFAN1.
SATA Power Connector: JSATA_PWR1 /2
The connector provides the power to the SATA device.
4.+1
2V
3.Gro
und
2.Gro
und
1.5V
•
•
Summary of Contents for MS-9887
Page 1: ...IM QM67 MS 9887 v1 x Industrial Computer Board...
Page 13: ...1 5 MS 9887 CFast Slot CFast Slot...
Page 31: ......