Hardware Setup
MS-98E0
2-13
Hardware Setup
MS-98E0
Jumper
Important
Avoid adjusting jumpers when the system is on; it will damage the motherboard.
Clear CMOS Jumper: JCMOS1
There s a CMOS RAM onboard that has a power supply from an external battery
to keep the data of system configuration. With the CMOS RAM, the system can
automatcally boot OS every tme t s turned on. If you want to clear the system
configuration, set the jumper to clear data.
Normal
(default)
Clear CMOS
1
1
1
JCMOS1
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to
1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage
the motherboard.
AT/ATX Select Jumper: JAT_ATX1
Ths jumper allows users to select between AT and ATX power.
ATX
(default)
AT
1
1
1
JAT_ATX1
Summary of Contents for MS-98E0
Page 1: ...MS 98E0 v1 x Industrial Computer Board...
Page 11: ...MS 98E0 1 5 MS 98E0 SIM Card Holder Mini PCIe Slot SO DIMM Slot...
Page 12: ......
Page 50: ......
