2-14
Hardware Setup
MS-98J4
Jumper
Important
Avoid adjusting jumpers when the system is on; it will damage the motherboard.
Clear CMOS Jumper: JCMOS1
There is a CMOS RAM onboard that has a power supply from an external battery
to keep the data of system configuration. With the CMOS RAM, the system can
automatically boot OS every time it is turned on. If you want to clear the system
configuration, set the jumper to clear data.
Normal
Clear CMOS
1
1
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to
1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage
the motherboard.
AT/ATX Jumper: JAT1
This jumper allows users to select between AT and ATX power.
ATX
AT
1
1
ME Jumper: JME1
This jumper is used to enable/disable the Intel ME function.
Normal
ME Disable
1
1
eDP Power Jumper: JEDP_VDD1
This jumper specifies the operation voltage of the eDP connector.
1
VCC3
VCC5
1
