2-5
Hardware Setup
MS-98K1
5. Secure the load lever with the hook
under the retention tab.
6. Make sure the four hooks are in
proper position before you install
the cooler. Align the holes on the
motherboard with the cooler. Push
down the cooler until its four clips
get wedged into the holes of the
motherboard.
7. Press the four hooks down to
fasten the cooler. Turn over the
motherboard to confirm that the clip-
ends are correctly inserted.
8. Finally, attach the CPU Fan cable
to the CPU fan connector on the
motherboard.
Important
•
Confirm if your CPU cooler is firmly installed before turning on your system.
•
Do not touch the CPU socket pins to avoid damage.
•
Whenever CPU is not installed, always protect your CPU socket pins with the plastic
cap covered.
•
Please refer to the documentation in the CPU cooler package for more details about
the CPU cooler installation.
•
Read the CPU status in BIOS.
