3-8
3-9
BIOS Setup
MS-98K1
▶
C States
This setting controls the C-State (CPU Power state). C-State performance
indicates the ability to run the processor in lower power states when the PC is
idle. This setting enables/disables the C-State Configuration for power saving
purposes.
▶
Super IO Configuration
▶
Serial Port 1/ 2/ 3/ 4
This setting enables/disables the specified serial port.
▶
Change Settings
This setting is used to change the address & IRQ settings of the specified
serial port.
▶
Mode Select
Select an operation mode for the specified serial port.
▶
Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that generates
a reset when the software that it monitors does not respond as expected each
time the watch dog polls it.
▶
FIFO Mode
This setting controls the FIFO data transfer mode.
▶
Shared IRQ Mode
This setting provides the system with the ability to share interrupts among its
serial ports.
