background image

BIOS Setup

MS-7522

3-9

BIOS Setup

MS-7522

Prmary Graphc’s Adapter

Ths settng specfies whch graphc card s your prmary graphcs adapter.

PCI Latency Tmer

Ths tem controls how long each PCI devce can hold the bus before another takes 

over. When set to hgher values, every PCI devce can conduct transactons for a longer 

tme and thus mprove the effectve PCI bandwdth. For better PCI performance, you 

should set the tem to hgher values.

CPU Feature

Press <Enter> to enter the sub-menu and the followng screen appears:

Hyper-Threadng Technology 

The processor uses Hyper-Threadng technology to ncrease transacton rates and 

reduces end-user response tmes. The technology treats the two cores nsde the 

processor as two logcal processors that can execute nstructons smultaneously.  In 

ths way, the system performance s hghly mproved. If you dsable the functon, the 

processor wll use only one core to execute the nstructons. Please dsable ths tem 

f your operatng system doesn’t support HT Functon, or unrelablty and nstablty 

may occur.

Important

Enablng the functonalty of Hyper-Threadng Technology for your computer system 

requres ALL of the followng platform Components:

CPU: An Intel

® 

Pentum

® 

4 Processor wth HT Technology;

Chpset: An Intel

® 

Chpset that supports HT Technology;

BIOS: A BIOS that supports HT Technology and has t enabled; 
OS: An operatng system that supports HT Technology.

For more nformaton on Hyper-threadng Technology, go to:
www.ntel.com/nfo/hyperthreadng  

Execute Bt Support

Intel’s  Execute  Dsable  Bt  functonalty  can  prevent  certan  classes  of  malcous 

“buffer overflow” attacks when combned wth a supportng operatng system. Ths 

functonalty allows the processor to classfy areas n memory by where applcaton 

code can execute and where t cannot. When a malcous worm attempts to nsert 

code n the buffer, the processor dsables code executon, preventng damage or 

worm propagaton.

Set Lmt CPUID MaxVal to 3

The Max CPUID Value Lmt s desgned lmt the lsted speed of the processor to 

older operatng systems.




Summary of Contents for X58 Pro-E seres



































































































































Reviews: