39
BIOS Setup
f
CPU Base Clock Apply Mode [Auto]*
Sets the applying mode for adjusted CPU base clock.
[Auto]
This setting will be configured automatically by BIOS.
[Next Boot] CPU will run the adjusted CPU base clock at next boot.
[Immediate] CPU runs the adjusted CPU base clock immediately.
[During Boot] CPU will run the adjusted CPU base clock during boot.
f
Clockgen Features
Press
Enter
to enter the sub-menu. Sets the detailed clockgen features.
f
Dynamic Frequency Control [Disabled]
When enabled, it allows CPU to operate different base clock frequency steps
dynamically according to CPU loading. This item will be disabled when the
Dynamic
Frequency Search
is enabled.
f
DFC Baseline (MHz) [Auto]
Manual set initial base clock frequency for Dynamic Frequency Control. This item
will be available when the
Dynamic Frequency Control
is enabled.
f
Threshold 1~3 (A) [Auto]
Sets the CPU loading threshold for
Dynamic Frequency Control
. When the CPU
loading reach to a set value of
Threshold 1/ 2/ 3
, and the CPU will run the base
clock that set in the
Level 1/ 2/ 3 BCLK
field. These items will appear when the
Dynamic Frequency Control
is enabled.
f
Level 1~3 BCLK (MHz) [Auto]
Sets the base clock frequency for
Dynamic Frequency Control
function. When the
CPU loading reach to a set value in
Threshold 1/ 2/ 3
field, and the CPU will run
the base clock of
Level 1/ 2/ 3 BCLK
. These items will appear when the
Dynamic
Frequency Control
is enabled.
f
Dynamic Frequency Search [Disabled]
Enables or disables the base clock optimization for CPU. This item will be disabled
when the
Dynamic Frequency Control
is enabled.
[Enabled]
Run the CPU BCLK optimization.
[Disabled]
Disables this function.
f
Dynamic Frequency Search Mode [Once]
Allows CPU to run base clock optimization either once or every booting. This item
will be available when the
Dynamic Frequency Search
is enabled.
[Once]
Run CPU BCLK optimization once only on next boot.
[Each Power On] Always run CPU BCLK optimization on every boot.
f
Dynamic Frequency Search Step (MHz) [Auto]
Sets a value for each step of base clock optimization. If set to
Auto
, BIOS will
configure this setting automatically. This item will be available when the
Dynamic
Frequency Search
is enabled.
f
BCLK Amplitude [Auto]
Sets the value for BCLK Amplitude for overclocking. Higher value might benefit to
get higher overclocking values.
Summary of Contents for Z270 GAMING M5
