WATER MAINTAINCE AND CHEMICALS
Water Sanitation
The spa owner must regularly check and keep the spa water sanitized with scheduled maintenance (daily, if
necessary). Adding sanitizer or other chemical will control bacteria and viruses present in the spa water. The
maintenance of a proper water balance through appropriate use of sanitizers is the most important factor in
maximizing the life and appearance of the spa as well as ensuring clean, healthy and safe water.
Proper technique is important for water testing and treating the spa water. See your spa professional for
chemical, sanitizer, test kit and testing procedures questions.
CAUTION:
Always follow the chemical manufacturer’s direction, and the health and hazard warning.
Do not add chemicals if the spa is occupied. This can cause skin or eye irritation.
Concentrated chlorine solutions can damage the spa tub. Improper chemical use will void the warranty.
Maintenance of Spa Water and Cartridge
Protect all the spa occupants from possible water related illness by keeping the spa water clean and sanitized.
Always practice good hygiene. To ensure proper spa water quality by following these procedures:
1. Inspect and clean the filter cartridge after each use, and change the filter cartridge after it works
continuously for 72 hours.
Unscrew the cartridge assembly from the spa tub wall and remove the cartridge by turning it
counter clockwise (Fig.1.1)
Use a garden hose to rinse off the cartridge. If the cartridge remains soiled and discolored it should be
replaced. Keep spare cartridges on hand.(Fig.1.2).
Reinstall the clean or spare cartridge back onto the spa tub wall but turning it on clockwise. (Fig.1.3)
20
LOCK THE SCREEN:
$[|$}\[~`” buttons together to lock the control panel to avoid any
wrong operation by children. Press the two buttons together once again to unlock the control panel.
IMPORTANT
:
The following conditions will lead to slow water heating
^'%="&
` ?^^
%]=@ &
LED READING
CAUSE
SOLUTION
F1-3
F4
F5-7
SPL
SPH
Filter failure
Filter or heating burst into work
Heating failure
Water temperaturer is lower than zero degree
Water temperature is too high
|
GFCI. If the spa function is still not working,
contact the MSpa Service Center.
"
if yes, add more water to the minimum line.
ERROR CODE CHART
`
proper. If the product is still not work,
contact the MSpa Service Center.