21
Water Balance
Maintain the spa water pH level between 7.2 and 7.8, total alkalinity between 80 and 120ppm and free chlorine
level between 3 to 5ppm. Use the *optional Test Strips to test the spa water chemistry before each use of the
spa and continue to test the water no less than once a week.
> ['"\[ _\[\
1. Dip the entire strip into the water and remove immediately
2. Hold the strip level for 15 seconds. Do not shake excess water from the strip
3. Compare the strip pad to the color chart on the packaging label. If necessary, adjust the chemical level in
the pool water
NOTE:
_ ~
warranty.
_ _%&
damage.
IMPORTANT:
Press the Bubble button on the spa control panel to turn on the bubble air blower and help
dissolve the chemicals into the water.
Never mix chemicals together. Add the chemicals to the spa water separately.
Thoroughly dissolve each chemical before adding one to the water.
@" ?^ >["\
section for instruction.
3. Use spa chemicals to maintain proper water chemistry. Spa damage resulting from misuse of chemicals
and mismanagement of spa water is not covered by the warranty. Consult with your local spa or pool
retailer for more information on chemical use.
4. All occupants must shower before entering the spa.
5. When spa inlet or outlet is stuck with dirt. Use the
Wrench to check the problem and clean the inlet
or outlet.
1.1
1.2
1.3
ONLY install the filter
cartridge here!
ONLY install the filter
cartridge here!
5