background image

Cleaning the spa

 

Detergent residues and dissolved solids from bathing suits and chemicals will gradually accumulate in the 

Spa’s water. If there is a lot of dirt in the water, try and get it out or change water and clean the pool. Use 

a mild soap and water solution to wash the vinyl then rinse with freshwater and drain this out before you 

fill up your MSpa with new fresh water.

NOTE: 

Do not use hard brushes or abrasive cleaners. 

Drainage 

1. Turn off all the buttons on the control panel. 

2. Unscrew the valve on outside of the spa pool till it is detached from the drainage structure. 

3. Connect the black drainage hose on to the drainage structure. 

Make sure it is well connected and the other end of the drainage hose is connected to a ground drain. 

4. Pull and open the cover of the drainage structure inside of the spa pool, water will flow out from the 

drainage hose. 

5. Tilt the spa until no water flow out to empty the spa completely.

If you are going away for some weeks and nobody can follow up the water treatment 

program in your MSpa, please drain out the water before leaving and take out some 

air pressure.

Spa Pool Repair 

If the Spa is torn or punctured use the provided Repair Patch. Dry the area to be repaired. apply the glue 

for PVC to PVC to the repair patch and then attach it onto the damaged area. Smooth the surface to 

remove any air bubbles. A secure unnoticeable repair can usually be made.  

Spa Storage 

After the spa is drained, unscrew the complete part of the air valve on the spa pool and the spa will be 

deflated. 

Make sure all water is drained from the Spa and control box. This is essential to extend the life of the spa. 

We recommend the use of a wet/dry vacuum to blow out or suck up water from the Spa pipes and Pump 

lines. Remove the Filter Cartridge. It is recommended you store the spa in its original package in a warm 

dry place.

NOTE: 

Make sure all components are completely dry and clean before re-packing.

              Store safely in dry condition and out of sunlight.

Plastic becomes brittle and susceptible to breakage when exposed to subzero temperatures.

Freezing can severely damage the Spa. Improper winterization of your Spa may void your warranty.

DISPOSAL 

1.The marking 

 indicates that this product shall not be disposed with the general household waste. 

Please contact your local community about collection points or ask your dealer.

2.This product contains valuable materials that can be recycled and contribute to a sustainable 

enviroment. 

3.For recovery, recycling and dismantling information for this product, please visit us at 

www. the-mspa. com 

TROUBLESHOOTING

 

Mspa

®

 strives to provide the most trouble-free spas on the market. If you experience any problem 

whatsoever, do not hesitate to contact us or our afer sales service center.

Here are some helpful tips to help you to diagnose and rectify some common sources of trouble.

*For any spare parts you need for replacement by yourself as mentioned in the list, please refer to the 

warranty policy in detail.

*For any other unknown failures out of the list, please contact your country MSpa service center.

10

Summary of Contents for B-110 Silver Cloud













Reviews: