background image

2

                                     IMPORTANT SAFETY INSTRUCTIONS

                                                                            !    WARNING

For your own safety and that of your equipment, make sure to take the following precautions. Failure to follow warning 
notices and instruction may result in property damage, serious injury or death. Improper installation or operation will 
void the warranty

When installation and using this equipment, basic safety precautions should always be followed, including the following:

Risk of Electric Shock

WARNING:

 If the power cord is damaged, purchase a replacement immediately from the manufacturer, MSpa after sale  

                    service center or contact a licensed electrician to replace the cord.

WARNING:

 

DO NOT

 use an extension cord to connect spa tub to the power plug; provide a properly located receptacle.

DANGER:

 

DO NOT 

permit any electrical appliances, such as a light, telephone, radio, television, etc, within 1.5m (5   

                  feet) of the spa tub. No appliances are allowed to locate above the spa tub.

WARNING:

 Electrical parts (except the one with extra-low voltage below 12V) must be inaccessible to occupants in the 

                    spa tub.

WARNING:

 Electrical parts incorporating any electrical components (except remote control devices) must be properly  

                    located so they will not fall into the spa tub.

WARNING:

 It is important only to use a 16A (13A for UK

10A for Australia& New Zealand) power supply.

Attention: Static shocks, and how to avoid them

You'll often find shocks are worst in the winter when the air outside is cold and dry. They may disappear in warmer 
damper weather. Man-made floor and shoe sole materials have been main factors in most cases of shocks. Static 
shocks can be a nuisance - but are not generally a health risk.

Tip - 

if the air in your room is very dry you could try keeping an open wide dish of water handy - this will evaporate and  

        moisten the air nearby.

Tip -

 cotton clothes are comfortable and usually give no static problems.

Tip -

 try different shoes to see if some give less problems. Leather soles are often good.

To avoid static shocks in MSpa, wet body and hands or touch metal stuff to dissipate charge before entering 
into MSpa.

WARNING: 

The appliance should be supplied through a residual current device (RCD) with a rated tripping current not  

                    exceeding 30 mA. RCD must be tested before each use.

WARNING:

 RCD must be tested before each use.

WARNING: 

Make sure the residential electrical connection box is located safely (at least 2m) away from the spa pool.

WARNING: 

Make sure the floor is capable of supporting the expected load, which you can find from the specification 

                    sheet on page 4, water capacity plus weight.

WARNING:

 An adequate drainage system must be provided to deal with overflow water.

WARNING:

 DO NOT leave the spa tub empty for an extended period; this could damage the spa tub.

WARNING:

 Disconnection must be incorporated in the fixed wiring in accordance with national or local wiring rules. The 

                    disconnection must be intended to ensure a all-pole disconnection.

WARNING: 

Spray head must not be used in the spa tub.

WARNING: 

DO NOT connect the spa tub hose to any taps or fittings other than those specified in the user manual.

WARNING:

 Electric installations should fulfill the local requirements or standards.

WARNING:

 DO NOT use the spa tub when it rains, thunders or lightens.

WARNING: 

This appliance is not intended for use by persons (including children) with reduced physical, sensory 

                    or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
                    instruction concerning use of the appliance by a person responsible for their safety.

WARNING: 

Children should be supervised to ensure that they do not play with the appliance.

WARNING: 

To reduce the risk of injury, DO NOT permit children to use this product unless they are closely supervised 

                    all the times.

DANGER:

 

Risk of Accidental Drowning.

 Extreme caution must be exercised to prevent unauthorized access by children.

Summary of Contents for B- 131 Luxury Exotic


















Reviews: