mspa B- 131 Luxury Exotic, Owner'S Manual And Warranty

5

                                                    INSTRUCTIONS

NOTE: Ensure to check all parts are present.

A: Spa top zipper cover with aluminum foil inside
   

  B-091 comes with a top lid, which is

     connected to ground cloth by buckle
     instead of zipper and digital lock.

B: Control panel 
C: Spa pool 
D: Temp barrier mat
E: Digital lock (except B-091) 
F: Inflation hose
G: Filter cartridge 
H: Drainage hose adapter
I:   Repair kit 
J:  Manometer 
K: Inflatable bladder
L:  Wrench
NOTE: Drawings for illustration purpose only in this manual. Actual product may vary. Not to scale.

A. Site Requirements

WARNING: 

The floor has to be capable of supporting the expected load of the spa tub.

WARNING: 

An adequate drainage system has to be provided to deal with overflow water.

IMPORTANT: 

It is extremely important to make sure the spa tub is placed on a structurallysound surface which will 

                       support the weight of the spa, water, and occupants. Flat, smooth and supporting surface is required. 
                       Uneven or unsound surfaces can damage the tub and void your warranty. Regardless, it is your 
                       responsibility to make sure the site is properly prepared, whether on the ground, on a floor, deck, 
                       patio or slab. Level the surface before filling spa with water.

a) Indoor Installation:
Indoor installations have special considerations, be aware of following requirements.

• Verify the supporting floor structure will accommodate the filled weight of the spa with occupants. A qualified 
   contractor or a structural engineer can help to determine the requirements. The floor where the spa tub is installed
   must be a nonslip and flat surface.
• A proper drain is essential to indoor installation. Select flooring which provides a good grip for wet feet.
• Humidity is a naturally side effect of indoor spa installation. Determine the effects of airborne moisture on exposed 
  wood, paper and etc in the proposed location. The room should be properly ventilated to allow moisture to escape. 
  Installation of a bathroom fan or other venting system is a good idea to prevent excess condensation in the room.

Note: 

Do not install the spa tub on a carpet or any other materials that could be damaged by moisture.

b) Outdoor Installation:
WARNING: TO AVOID THE ELECTRIC SHOCK, DO NOT USE THE SPA IN THE RAINS.

It is important to install the spa tub on a firm level surface. If the spa tub is installed outdoors, make sure there are no 
sharp objects that could damage the unit. The surface must be flat so the spa tub will be placed firmly and properly.
• If outdoors, make sure that the site has adequate drainage so water splashed out during filling, emptying or using 
  the spa will not be able to pool around the spa.
• Do not leave the spa tub exposed to direct sunshine for an extended period.

Note:
1. It is important only to use a 16A (13A for UK, 10A for Australia& New Zealand) power supply.
2. If have to use an extension cord/connecting cable, please make sure it is for 16A (13A for UK) purpose and 
    for outdoor use.
3. For safety reasons, set up spa tub at least a few meters away from power supply and within line of slight 
    of the spa for safety

A.

B.

C.

D.

E.

F.

G.

H.

I.

J.

K.

L.

1pc

1set
1pc
1pc
1pc
1pc
2pcs
1pc
1set
1pc
1pc
1pc