2016 Elite Bubble & Jet Spa Service manual
MSpa website: www.the-mspa.com
-
16
-
3. Unscrew four screws that place filter pump onto the
control box.
4. Unplug the filter pump cable connection fitting.
5. Loosen the filter pump inlet valve.
6. Take out the original filter pump and assemble the
new filter pump in reverse order.
4.3
How to Replace the Heater Element
1. Take off water inlet and outlet caps.
2. Remove the air pipe.
3. Deflate spa pool.
4. Unscrew the check valve plastic nut.
The upper square valve is for inflation
The button round valve is for deflation
