2016 Elite Bubble & Jet Spa Service manual
MSpa website: www.the-mspa.com
-
23
-
5. Cut off the tie of ozone pipe.
6. Unplug Ozone generator pipe.
7. Take out control box from spa pool.
8. Remove the foam.
9. Loosen four screws on the top lid.
10. Disassemble the mid part of the control box.
11. Loosen four screws on the power board case top
lid.
12. Cut off the ties on the board.
13. Unplug transformer cables on the power board.
14. Unscrew the screws that fix the transformer onto the
control box.
