2019 Premium Concept Elite Service Manual
Visit our website at: www.the-mspa.com
- 30 -
5.1
The following Check Flow is as attached.
Premium Elite Delight Concept Spa
Check Flow
–E0-E1.pdf
Premium Elite Delight Concept Spa
Check Flow
–heating failure.pdf
Premium Elite Delight Concept Spa
Check Flow -NO DISPLAY.pdf
Tips
：
To keep the filter pump and heater at a great performance, proper maintenance and cleaning of filter
pump, paper filter cartridge, and the water inlet is highly recommended. How often to clean depends on the
local water conditions and user habits. Regular fresh water and vinegar are suggested for the filter pump
cleaning.
5.2
Air Leakage and Inflation Failure Checking Flow Chart
5.3
Water Leaking Problem Checking Flow Chart
1
、
Long P
ress “BUBBLE” button and check whether there is air
blowing out from the pool body
？
2
、
Check the Rotation knob whether is “ON”
？
3
、
Check the air valve with manometer is tightly screwed into pool
body
？
Screw the air valve tightly and handle the
air valve for inflation and deflation as per
the Manual
’s instruction.
Pre
ss ”Bubble” button and inflate the
spa. Make sure to turn the rotation knob
to OFF when inflation completed.
Yes
Yes
1. INFLATION
PROBLEM: Spa cannot
be inflated
2. AIR LEAKAGE: Spa
pool cannot hold air
2.1 Check air valve cover
and see if it’s screwed
tightly and properly?
2.2 Check the Rotation
knob
whether is “ON”
when bubble function
not working
No
Yes
Repair the tiny hole(s) or split(s) with
PVC swatches in the repair kit. (Caution:
DO NOT over inflate the spa.
2.3 There are tiny pin
holes or splits on the spa
liner? Brush soap water
onto spa liner or seam to
test where is leaking.
Yes
Yes
