DO NOT leave your MSpa full of water if you will be away for awhile or no one can take care of the pool.
Drain the water before you leave and deflate the spa pool body a bit.
Spa Pool Repair
If the spa pool body is damaged, use the repair patch provided in the package. Clean and dry the damaged area
in order to prevent dust or dirt from getting on the tacky glue. Apply glue to the PVC of the repair patch and quickly
attach it onto the damaged surface. Smooth the surface to remove any air bubbles and allow it dry for roughly 3-10
minutes. A secure and unnoticeable can usually be made.
Spa Storage
After the spa is drained, unscrew the complete part of the air valve on the spa pool and the spa will be deflated.
Make sure all water is drained from the spa tub and the control box. This is essential to extend the life of the spa.
You could also use a vacuum or hair blower to suck up or blow out the water from the pipe and pump lines. Filter
cartridge also needs to be removed. It is recommended to store the spa tub in the original packaging box. Store the
tub in a warm and dry place.
NOTE:
All components must be completely dry and clean before packaging and storage. Store the spa safely in a
warm and dry condition. Exposure to sunshine is not recommended. Plastic can becomes brittle and susceptible to
breakage when exposed to a sub-zero temperature environment. Icy weather or store below sub-zero temperature
can severely damage the spa tub. Improper winterization of your MSpa may void your warranty.
Spa checklist before unpack the unit and re-use for the new season:
In order to have your MSpa runs smoothly and easily for the new season, follow the check steps below:
1. Check if there is water in the air pipe. If any water is found, dry the air pipe before operating the spa tub.
2. Connect control panel correctly, turn on the spa tub, check if LED displays correctly and if the signal
cable is connected properly.
3. Press ON / OFF button on the control panel, open jet function, check if it operates properly.
After doing the above steps, your MSpa should be ready for use. Enjoy it!
Note:
Any damage caused by improper storage or failure to do the checklist of reuse will void your warranty.
TROUBLESHOOTING
Mspa® strives to provide the most trouble-free spas on the market. If you experience any product related problems,
do not hesitate to contact us or your local after sales service center.
Here are some helpful tips to help you to diagnose and rectify some common sources of trouble.
* For any spare parts you need for replacement, please refer to the warranty policy for replacing details.
* For any other unknown failures out of the list, please contact your national or regional MSpa service center.
15
