2016 Premium MSpa Service Manual
Visit us at: www.the-mspa.com
- 17 -
5. Cut off the tie of ozone pipe.
6. Unplug Ozone generator pipe.
7. Take out control box from spa pool.
8. Remove the foam.
9. Loosen four screws on the top lid.
10. Disassemble the mid part of the control box.
11. Unscrew screws that place bubble generator onto
the control box.
12. Take out of the bubble generator form control box.
13. Cut off the heat-shrink tube.
14. Unplug bubble generator elements cables.
