2016 Premium MSpa Service Manual
Visit us at: www.the-mspa.com
- 19 -
1. Take off water inlet and outlet caps.
2. Remove the air pipe.
3. Deflate spa pool.
4. Unscrew the check valve plastic nut.
5. Cut off the tie of ozone pipe.
6. Unplug Ozone generator pipe.
7. Take out control box from spa pool.
8. Remove the foam.
9. Loosen four screws on the top lid.
10. Disassemble the mid part of the control box.
The upper square valve is for inflation
The button round valve is for deflation
