2016 Premium MSpa Service Manual
Visit us at: www.the-mspa.com
- 31 -
Filter: 0.035-0.06kW/hr
Heater: 6.75-1.5kW/hr
10.8.
Question:
What if I already screw off the inlet and outlet when the product was full with water? Did I hurt the
engine?
Answer: No, it’ll not hurt the engine, but the water leakage is a big problem, which would damage or cause
electric shock if there is any other electrical equipment around the spa.
10.9.
Question: Where to buy filters cartridges?
Answer: Please contact the local dealer who you’ve bought the Mspa from for the filter cartridges, or contact the
local service center, the last option is to email Mspa China: info@the-mspa.com
10.10.
Question: Why bubble function stop working?
Answer: The bubbling massage function will be shut down automatically after every 20 minutes operation for
safety concern. It can not be operated within 10 minutes after shut down.
10.11.
Question: Why ozone function cannot work when I use the spa?
Answer: For bathers' safety concern, the ozonator cannot be operated at the same time when the Bubble or Jet
function is on. The Ozonator will be off automatically after operating for 2 hours. Ozone output is
30-50mg/Hr.
Chapter 8. Attachment
8.1 Attachment 1: Error code check flow
Premium Bubble Spa Check Flow – E0
Premium Bubble Spa Check Flow – E1
Premium Bubble Spa Check Flow – E2
Premium Bubble Spa Check Flow – E3
Premium Bubble Spa Check Flow – E4
8.2 Attachment 2: After sales spare parts list
