2016 Premium MSpa Service Manual
Visit us at: www.the-mspa.com
- 7 -
2.5 Avoid Air Leakage from Spa Liner Split or Tiny Holes Due to Over-inflation
Ensure to ask customers to test the spa pool air pressure with manometer. Testing air pressure is
very critical during the installation process, because any air leakages, pool liner splits due to over
inflation are not covered by the ORPC/MSpa warranty. It is important to advise customers to watch
the MSpa DVD or follow the instruction manual carefully to check and test the air pressure every
single time before inflating or using the spa.
2.6 Try to Repair the Tiny Holes or Split on Spa Liner Instead of Replacing a New Spa Liner
For pool liner air leakage caused by tiny holes or splits, it is suggested to first try to repair with glue and PVC
swatches provided in the repair kit. You can also order the glue and repair swatches from the spare part list.
With the repair material, most pin holes and splits can be repaired easily within 10 minutes.
Spa Tub and Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
1. Clean and dry the area to be repaired thoroughly
2. Apply the glue to the PVC patch and quickly attach it onto the damaged surface
3. Smooth the surface to remove any air bubbles and allow it dry for 5-10 minutes
NOTE:
Glue is not included
2.7 Using Spa in the Cold Weather
It’s only possible to set up and leave the spa in the environment of outside temperature of less than 4°C as long as the
spa has a constant water temperature guaranteed over 4°C.
Spa can only be used for temperature down to maximum
-10°C if it is properly set up to make sure no frozen water inside control box, pipes and spa pool.
Optional accessories:
B9300109N Heat Preservation Mat
is helpful to avoid heat loss from bottom and it
provides better heat insulation results with the inflatable bladder in use.
Inflatable bladder
provides better heat preservation and rain outflow
B0301965 Winter electric heat preservation mat
is available from 2014 season. It offers
great effect to retain constant temperature for Mspa use in the chilly time, fitting to all Mspa
models.It is round shape, made of laminated PVC material. 220-240V, 400W, Dia.1.2m (47”)
Winter sauna cover
B0301687N suitable for max, 3 adults to use and fits all Mspa
4-person round products.
B0301688N suitable for max, 4 adults to use and fits all Mspa 6-person round products
