© MSR Electronics GmbH, 2022-02-22. All rights reserved.
12
MSR Electronics GmbH • Mettlenstrasse 6 • CH-8472 Seuzach • Switzerland
Phone. +41 52 316 25 55 • info@msr.ch • www.msr.ch • www.datalogger.shop
STOP Data Logger
To stop recording, press the «STOP» button continuously for 5 seconds until the red LED is ON.
Note: Logger will be automatically STOPPED after 10 seconds when connected with the USB port of a PC.
Report Generation
MSR BudgetLine data loggers are available with integrated USB 2.0 A-Type plug. Hence, no additional hardware or cable is required to connect the logger
with the PC. After stopping, when the logger is connected for the first time to the USB port of the computer, both LEDs (green & red) will start flashing to show
the report generation is in process. Do not disconnect the logger until both LEDs (green and red) are ON continuously, which indicates the report is
ready. Once the report is generated, whenever the logger is connected to the USB port of the computer, both LEDs (green & red) are ON continuously, which
indicates the data logger is in stop mode and the report is already generated.
Open data logger USB drive «PDF_Logger» that contains soft copy of the Quick Start Guide and the Calibration Certificate «CXXXXXXXXXX.pdf» and
«UI4Report» – to get a report of the recorded readings in PDF / Excel / CSV formats.
