© MSR Electronics GmbH, 2022-02-22. All rights reserved.
6
MSR Electronics GmbH • Mettlenstrasse 6 • CH-8472 Seuzach • Switzerland
Phone. +41 52 316 25 55 • info@msr.ch • www.msr.ch • www.datalogger.shop
New data is loaded in the device. Please validate
data in configuration screen before removing the
device. Click OK.
Verify the set parameters and click Close or
Print to get a printout of the confirmation window.
Just after disconnecting the data logger, the green and the red LED will start flickering and then the green LED will be ON for a second indicating the
configuration of the logger has completed successfully.
Check if configuration is completed successfully:
MSR BudgetLine loggers with display will continuously indicate current reading only (START | STOP | RUN | OKAY will not be shown on the display).
Press «START» button on the data logger once; twice blinking of the green LED will indicate that the configuration is completed successfully.
Note: FailSafe Logging will be automatically started after the configuration of the data logger. This helps the receiver to get recorded readings
from the logger even if the sender forgets to press the START button while activating the data logger.
