Start Logger:-
∙ Initially current reading will be shown on display before starting logger
∙ Keep START button pressed continuously for 5 seconds to start logger
∙ Then Green LED and Red LED will start flickering, Green LED will be ON for 1 second
confirming logger has been started successfully
∙ Display will indicate START till delay start time is over
∙ After completion of delay start time, display will indicate RUN & current reading
confirming logger has been started successfully
Note: Do Not Use Logger if START is not shown on display and LED is not ON after pressing START button for 5 seconds
Multi-Function LCD Display
Green & Red
LED Indication
2.0 A-Type
USB Connection
Waiting to START
Press START button continuously
for 5 seconds to start logger
Logger is STARTED
Logger is waiting till
delay start time is completed
Logger is in Recording Mode
Logger is waiting till
delay start time is completed
BudgetLine
PDF USB Loggers
Quick Start Guide
sales@msr.ch
www.msr.ch
