Check Status of Logger:
During Recording [RUN] & Stop [STOP] mode, press START button once to view MIN | MAX | AVERAGE values
Display Indication:
Only Current Reading
Not Started
START
Waiting to START
RUN
Started Recording
STOP
Recording is Stop
OK
No Alarm Condition
NOT OK
LO | HI Alarm Condition
Stop Logger:
∙ Keep STOP button pressed for 5 seconds to stop logger
∙ Display will indicate STOP confirming logger has been stopped successfully
Note: Logger will be stop after 10 seconds when connected with USB port of PC
PDF Generation:
∙ After stopping, when the logger is connected for first time to USB port of the computer, both LEDs (GREEN &
RED) will start flashing to show the PDF generation is in process
∙
Do Not Disconnect Logger until both LEDs (GREEN & RED) are ON continuously
, which indicates PDF is ready
∙ Then folder containing PDF will open automatically. Double click to open Copy and Save As PDF file to desired
location
∙ Once the PDF is generated, whenever the logger is connected to USB port of the computer, both LEDs (GREEN &
RED) are ON continuously, which indicates logger is in stop mode and PDF is already generated
sales@msr.ch
www.msr.ch
BudgetLine
PDF USB Loggers
Quick Start Guide
