Rev AE
User Interface 4-23
MSSC QM1610 Operator Manual
After selecting the production line direction, press
to save the
direction settings and return to the main menu.
Note:
If you have fixed the speed of the production line, MSSC recommends that
you set the production line direction to the Fixed Direction mode. This will
optimize the working stability of the printer.
3
Choose
Select Sensor
and press
to enter the following interface.
Press
to select the sensor. If there are no externally-
connected sensors, select
Internal
and press
to return to the
main menu. If there are external sensors, select
External
and press
to return to the main menu.
Note:
If the interference of the field environment is substantial (for example, the
interference caused by the presence of a large electrical device), MSSC
recommends that you use an external sensor and fix the metallic shell of the sensor
to a metallic bracket with a reliable grounding device. This will improve the
working stability of the printer.
Software Version Number
In the main menu, while
Software Version
is highlighted, press
to
enter the following interface.
7IPIGX7IRWSV
)<8)62%0
-28)62%0
Figure 4-47: Select Sensor
All manuals and user guides at all-guides.com
