a)
Do not operate the device if you are tired, ill or under the influence of alcohol,
drugs or medication which might impair your ability to operate the device.
b)
The device may only be operated by persons who are physically fit, capable of
handling the device and who have been adequately trained, who have read
these instructions and have received training in health and safety.
c)
The device is not intended to be used by persons (including children) with
reduced mental, sensory or intellectual functions or lack of experience and/or
knowledge, unless they are supervised by a person responsible for their safety
or have been given instructions by them on how to operate the device.
d)
Be careful and use common sense when operating the device. A short moment
of distraction during operation may lead to serious personal injury.
e)
Use the required personal protective equipment when working with the
device specified in section 1 of the explanation of symbols.
The use of appropriate, approved personal protective equipment reduces the
risk of injury.
f)
To prevent accidental start-up, make sure the switch is in the OFF position
before connecting the device to the power source.
g)
Do not overestimate your capabilities. Maintain body balance at all times
during operation. This allows for better control of the device in unexpected
situations.
h)
Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away
from moving parts. Loose clothing, jewellery or long hair can be caught by
moving parts.
i)
Remove all adjusting tools or keys before turning the device on. A tool or key
left in the rotating part of the device may cause injury.
j)
The device is not a toy. Children should be supervised to ensure that they do
not play with the device.
k)
Do not put your hands or objects inside the working device!
2.4.
Safe use of the device
a)
Do not overload the device. Use tools that are suitable for the given
application. A correctly selected device ensures better and safer performance
of work.
b)
Do not use the device if the ON/OFF switch does not function properly (does
not switch on and off). Devices that cannot be controlled by the switch are
dangerous, must not be operated and must be repaired.
c)
The device must be disconnected from the power supply before adjustment,
cleaning and maintenance. This preventive measure reduces the risk of
accidental activation.
