d)
Keep unused devices out of the reach of children and anyone not familiar with
the device or these instructions. Devices are dangerous in the hands of
inexperienced users.
e)
Keep the device in good working order. Before each use, check for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
have the device repaired before use.
f)
Keep the device out of the reach of children.
g)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen any screws.
h)
Avoid situations where the device stops under heavy load during operation.
This can cause overheating of the drive elements and subsequent damage to
the device.
i)
Do not touch moving parts or accessories unless the device has been
disconnected from the power supply.
j)
Do not move, shift or rotate the device during operation.
k)
Clean the device regularly to prevent the permanent accumulation of dirt.
l)
Do not work with two objects at the same time.
m)
The device is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
n)
It is forbidden to tamper with the device in order to change its parameters or
construction.
o)
Keep the device away from sources of fire and heat.
p)
Do not overload the device.
q)
Do not cover the vents of the device!
3.
Rules of use
This universal product is intended for sharpening drill bits, scissors, knives, chisels,
planes etc. items.
The user is responsible for any damage caused by improper use.
CAUTION!
Although the device has been designed to be safe and has
been equipped with adequate safeguards, and despite the use of
additional safety measures, there is still a small risk of accident or
injury when operating the device. Caution and common sense are
advised when using the device.
