[DSK new]
This new method loads the DSKs directly for the SD
card. No need to flash them in the cartridge. So it is
possible to read and write to them.
The disk image files must not be fragmented, that is,
their contents must be placed across consecutive
sectors in the device.
In order to switch to a different DSK, you must press
the appropriate key (1-9) while the computer is trying
to read the file; this will emulate a disk change.
Alternatively, you can also press the GRAPH key when
the computer is trying to read the file. The caps led will
lit and the computer will freeze until you release GRAPH
and press the appropriate DSK number.
Nextor will boot in disk emulation mode if it finds a file
named
NEXT_DSK.DAT
in the root directory of a
primary partition. This file is created when you press
RETURN
on a .
DSK
or .
FD1
….
FD9
file
To disable the disk emulation mode (that is, to boot
normally even if a NEXT_DSK.DAT file exists), keep the
0 (zero)
key pressed while the computer boots. You
will have to manually delete or rename the
NEXT_DSK.DAT file to prevent the disk emulation mode
to be entered again in the next system boot.
