Warning
For your safety, it is important that you read the entire own-
er's manual and its warnings.
Warnings
Do not ride without having previously fastened your helmet
properly.
Do not clean your helmet with petroleum products, solvents,
benzene, thinners or abrasive cleaning products.
Do not paint your helmet, otherwise your warranty will be void.
Do not drop your helmet from any height onto a hard surface.
This could cause damage to the surface of your helmet and/or
decrease its capacity to protect you.
Do not place your helmet on the rearview mirror of your mo-
torcycle: the strong pressure from the edge of the mirror com-
presses and damages the shock absorbing lining of the helmet.
Do not place your helmet on the motorcycle seat or on the fuel
tank. It could easily roll off and hit the ground causing irrepara-
ble damage. It is best to place the helmet on a flat surface or,
failing that, on the ground so that it cannot roll or fall off.
Do not use your helmet if the shield is scratched. This can affect
your vision, especially during night riding.
Do not alter any part of your helmet, drill holes in the shell, or cut
or press on the shock absorbing liner. The installation of sound
systems, speakers and microphones reduces the ability of your
helmet to protect you and is not recommended.
Do not reuse your helmet if it has fallen or has been involved
in an accident. Replace it even if the damage is not visible to
the naked eye.
Do not use dark or tinted visors riding in the dark or poor visi-
bility conditions.
Do not place helmet interiors or pads in the dryer after washing.
Allow to air dry.
Do not attempt to remove, change or replace the shield while
riding your motorcycle.
26
Warnings
Summary of Contents for MT FF118SV
Page 3: ...3 ...