39
OPERATION
UK
• MASK
: DPI/ALL
MASK DPI mode: masked only the AF which has Different PI (DPI). MASK ALL mode:
masked the AF which has Different PI and NO RDS signal with high field strength.
• RETUNE
: LONG/SHORT
When PI information gets lost at the current station for retune time which is set by RETUNE
SHORT (30 sec.) or RETUNE LONG (90 sec.), the radio start to retune to next same PI
station.
a) PI SOUND mode:
When above different PI sound (DIP) is heard once in a while, the DIP’s sound will
be heard for a short time.
b) PI MUTE mode:
Under above same situation, a mute sound will be heard for a short time.
The purpose of this function is to reduce unwanted EON TA switching, which EON TA
information was received from current station and the radio switched to that EON linked
station, but no information could not be received because the EON linked station is
located too far from that area. So the radio is switched back to current station again. In
above operation, a customer listens to a wrong program or mute sound for a while.
• EON TA
: Local/Distance
• TA VOLUME
: You can adjust the TA volume value in this item.
EON TA LOCAL mode
When the filed strength level of EON linked is less than threshold level, the radio does
not switch that station, and a customer can hardly listen to any disturbances.
EON TA DISTANCE mode
EON TA switch is tried to implemented by the information of current station.
• REGION
: OFF/ON
REGION ON mode: AF switching or PI SEEK is implemented to the station which have
all PI codes are the same as current station.
REGION OFF mode: The regional code in the format of PI code is ignored when AF
switching or PI SEEK is implemented.
-
Listening to Traffic Announcement
button (22) is operated as follows:
When pressed and held for several seconds, it is engaging whether
TA
mode on or off.
TA
When
TA
mode, is on and a traffic announcement is transmitted:
When the unit was in CD (MP3) mode or AUX IN mode, it will switch
temporarily to radio mode. Temporary switch over to an EON linked station when EON
detects a traffic announcement on that other program. If the volume level was under the
threshold point it will be raised to the threshold point. But the user changed the volume
level, which was more than the threshold point (min.
TA
volume level), it will be set to the
last level. When
TA
mode is on,
TA
of individual segment is turned on.
When a TP station is received, TP of individual segment is turned on.
TA
interruption function
The current traffic announcement is cancelled by pressing this key. But the
TA
mode will
not be off.
The RDS data used are the PI, PS, AF, TP, TA, EON and PTY data.
PI:
Program Identification code
Code for identifying programs
PS:
Program Service Name
Broadcast station name data expressed in alphanumerically characters
AF:
Alternative Frequencies
Frequency list of broadcasting stations transmitting the same program