GoCam4CH
6. Operating with Android devices
24
25
7. Operating with iOS devices
ENGLISH
ENGLISH
Go to the Main Menu -> System -> Network
-> Push notification. in the menu item „Enab-
le / Disable“, you can set the push notification
on or off. By „minimum time interval“, the time
delay of a push notification can be set.
Click at the Android app to „push notification settings“ to register an account. When motion is
detected by the camera, it sends a push notification to your phone.
Important notes:
1. Only when the receiver in the real-time state, to view the image.
2. If the Device ID was unable to get to the monitor, indicates that monitor did not normally
connect outer net, need to check your network.
3. If everything is normal, but still not in the mobile phone client to view images, please close the
client software running always in the background, please try it again.
4. The network adapter does not support hot-swappable, before open the monitor, The network
is connected with the monitor.
Setting the Push Notification
Note:
Only if the motion detection and/or heat
detection in the menu item „Recording“
is enabled, a push notice may be served.
5003
Networ k ready!
Networ k Informatio n
Golbal IP
Loca l IP
Port
Device ID
Insert the receiver in the pedestal, and connect
with the base power. Then connect the outer
net. Turn on the receiver.
After successful connection, go to the Main
Menu -> Network -> Network Information. In
the monitor display the following window will
be displayed.
Note:
The network features with iOS devices is
only in available at the IP version of the
camera system.
The monitor does not support Plug and
Play. First, plug the network adapter and the
LAN cable before you turn on the monitor.
Note:
If you want to stream the videos over the
phone network on your smartphone, you
must enable the
UPnP
function on your
Internet router.
Warning:
uPnP is not supported by any
Internet router. Alternatively, you enter
the port that is displayed on the display
manually.
Connect to the network
Check the App Store with your mobile device (eg smartphone). Search for the application
„
GoCam4CH
“ and download it. Install the software.
Download & Operation the App for Android devices
