dV E-Series Technical Reference Manual 208V – 600V
9
Form: DVT-TRM-E December 2021 Rev. 001
3. dV E-SERIES PERFORMANCE DATA
Performance Specifications
Table 3-1: Performance Specifications
Service Load Condition
Invertor Duty Three Phase Motors
Voltage
208 – 600 VAC +/- 10%, 60Hz
Input Voltage Wave Form
Pulse Width Modulation (PWM)
Inverter Switching Frequency
2kHz – 4kHz (3A – 750A)
Inverter Operating Frequency 0 – 60 Hz without derating
Maximum Ambient
Temperature
-40C to +60C Modular Filter
-40C to +50C Enclosed Filter
-40C to +90C Storage
Insulation System
Class N (200° C)
Insertion Loss (Voltage)
1.7% at 60 Hz
Efficiency
>99%
Current range
3A – 750A
Available form factors
Kit, Open Panel, NEMA 1/2, NEMA 3R
Altitude without derating
6,600 feet above sea level
Maximum Motor Lead Length
1,000 feet (VFD rated cable recommended)
Relative Humidity
0% to 99% non-condensing
Current Rating
100% RMS Continuous
150% for 1 minute
200% for 10 sec
*Operating in overload will result in increased proportional
voltage drop
Audible Noise
<65db at 1 meter
Rise Time
Greater than 0.1 uS
Peak Voltage @ Motor
150% of DC bus voltage up to 1,000 feet
